Terminal Blocks for Factory or Field Wiring. How to know what you’re getting –
Terminal Blocks come in many different forms. They’re rated for difference wire sizes, voltages and ampacities, temperatures, short circuit ratings, and more.
Many don’t know, however, UL also rates them for Factory or Field wiring. Terminal Blocks rated for Factory wiring only, cannot be used for wires to be installed in the field. So, if you’re at UL with your product that has a Terminal Block intended to be wired in the field, you better make sure you pick the right one.
Picking the right one –
UL designates Terminal Blocks for Factory or Field Wiring. See below from UL’s Guide Card on Terminal Blocks -
XCFR2.GuideInfo - Terminal Blocks - Component
Factory and/or Field Wiring (FW) — These terminal blocks are rated for: Code 1, factory wiring only, or Code 2, both factory and field wiring. The suitability of the connections (including spacings between factory connectors) shall be determined in the end-use application.
Unless noted with a "CA 4" in the last column, a terminal connector suitable for field wiring has been investigated to ANSI/UL 486A-486B, "Wire Connectors."
When Code 1 and Code 2 terminals are intermixed on the same terminal block, both codes will be used with suitable indication for which terminal each code applies, i.e., 1/2.
When looking for the right Terminal Block, look in the FW column on the companies UL Recognition card.
|
|
||||||||
|
Series |
Wire |
Wire |
|
TQ |
|
|
|
|
|
+FP |
14 |
Cu |
1 |
— |
300 |
20 |
C |
2(130),# |
|
+FS |
14 |
Cu |
1 |
— |
300 |
20 |
C |
2(130),# |
|
@FP-XX-25A |
12 |
Cu |
1 |
— |
300 |
25 |
C |
2(130),# |
|
@FS-XX-25A |
12 |
Cu |
1 |
— |
300 |
25 |
C |
2(130),# |
|
+D exept for D-11 |
4-18 SOL/STR |
Cu |
2 |
20 |
250/300 |
85 |
B/C |
2(130),# |
|
(2) 12-16 STR |
Cu |
2 |
20 |
250/300 |
35 |
B/C |
2(130),# |
|
|
(2) 18 SOL/STR |
Cu |
2 |
20 |
250/300 |
Since 1988, Product Safety Consulting has been providing product developers
and manufacturers with expert advice and testing services, so they confidently
secure product safety and regulatory compliance in the least time, and for the
least expense. From consumer products to lighting fixtures, to motor controllers
and medical devices, we have helped more than 3,000 customers in over 35
countries.
Product Safety Consulting has been helping companies obtain UL, CSA, ETL and CE approvals for more than 26 years. John Allen, our President and Founder, will be available to provide his compliance expertise and to help answer your technical questions. We highly recommend setting up an appointment either at our booth or yours so we can set time aside for you.
